Step-by-Step Installation Guide
Learn how to install your new rain shower head in 5 easy steps.
What You'll Need
Tools
- • Adjustable wrench
- • Adjustable pliers
- • Hex key (if needed)
Materials
- • Thread seal tape (PTFE)
- • New shower head
- • Clean cloth
Step 1: Turn Off Water Supply
Locate your main water shut-off valve and turn it off. Turn on a sink faucet to release pressure in the system.
Step 2: Remove Old Shower Head
Using an adjustable wrench, turn the shower arm counterclockwise to loosen and remove the old shower head. Be careful not to damage the pipe.
Step 3: Clean the Threads
Remove any old thread seal tape and debris from the shower arm threads using a clean cloth.
Step 4: Apply Thread Seal Tape
Wrap 3-4 layers of PTFE thread seal tape clockwise around the male threads of the shower arm.
Step 5: Install New Shower Head
Screw the new shower head onto the shower arm by hand first, then tighten with a wrench. Be careful not to over-tighten.
Final Checks
- ✓
Turn water back on slowly and check for leaks
- ✓
Test all spray modes and water pressure
- ✓
Wipe down and admire your new shower head
Troubleshooting
Water Leaking at Connection?
Apply more thread seal tape and tighten the connection slightly.
Low Water Pressure?
Check if the aerator is clogged. Clean with vinegar and a soft brush.
Uneven Spray Pattern?
This is often normal. Try different spray modes for best results.